Triple Curtain Rod

Measure width of the window of your treatment, taking into account if you want to mount the equipment on the wall or the trim of the window. Allow 1 1 / 2 inches to 3 inches on each side of the window curtains are fully open.Be sure to include a wall space for tips. To bring up the larger window, mount the curtain 4 inches above the finished window and allow the width of the curtain rod extend 3 inches on each side of the width of the current window. The length should be measured at the location where you want the bottom to stop on the line, 4 inches below the threshold, or floor. You can also make your curtains "puddle" on the ground.

To determine what support you need, assess the extent to which the wall of your curtain rods should be clear to the window frames and sills. This will be the "projection" in brackets so you need to identify the objects. Most of the curtains and rods have extensions support available if needed.

The amount of fabric you'll need for your curtains or curtains will depend on the fullness you want. For a custom look, the width of the window. For the standard look, you will need 1.5 times the width of the window. For a complete look, plan on three times the width of the window.

stratified treatment: When you want to use two or more different fabrics to cover your window. These require a curtain rod double or triple traverse rod, or a combination of glass fabric two.The side should be a half-inch less on treatment (fabric side of the room).

http://decor.basicq.com/cgi-bin/dcart/0-4019-1.html?id=BYF4AMFV&mv_pc=2242