Expensive Kitchens

You do not have much money and I Grante or marble tiles and hatred. Is there anything else I've never thought, that does not cost me much money. I am not kind of person, doing something hard does not scare me, just do not have different ideas. I need something intelligent. My decorating style is colonial. Need help!

I put 1 / 2 "plywood for cons in my counter. Then take a very thin plywood about 2 inches wide and make a shape around your countertop plywood. You can use drywall screws to fasten . Place chicken wire in the form and staple it below the top of the plywood. Buy ready-mixed concrete. Figure out how much you'll need to make counter space. Mix your batch of concrete and put in a small bucket and pour in your form does not make a mess. Just keep the level while skreeting in your form with a small board. You can save your design in concrete. You can die in it . You can put stamps in the area. You can buy relief tile, maybe 3 or 4 and alternate pressing them into the surface. Be sure to seal the surface with a sealant well. For a square board cons you can trim the edge with 2 "trim. If you want a top with curves in it. Your benefit must be paid. You have to build an advantage in this form to your ride 1 / 2 "plywood. To do this, you can take your left about 1 / 2" plywood and cons of building an advantage by screwing your note at the bottom of your desk All edges give you a 1 "wrong all around. Then screw your thin plywood for this, but remember if you do this, you will need a thin plywood to 2 1 / 2" then. If you have any questions just e-mail me. I would like 10 points. Thank you!

The marble is a poor choice for the trays, it is much too soft
if you have the energy when you can make a granite top, economically too, I do the tiles on my kitchen, but I'm chicken in Los Angelos prefabbed (they come from China), bought 3 plates, 2 2 x 8 footers and 1 3 x 9-footers, paid about 3100 for the pre fabbed slabs (with backsplash), and the smaller ones as low as 220 2x8 for salt / pepper granite model, mine has been the One of the most exotic colors so the price was more, but the cost was cheaper due to the fact that I installed (heavy on the 3x9!) two cabinets (again from Home Depot also premade / stained cabinets stock), top in cut and polished misc high (I had made of granite before and I still fabbing all my tools).

But I also made a granite kitchen ..

http://johnbridge.com/vbulletin/showthre ...

look there for the skinny on how we did it was a friend of mine, he brought the granite tile, but I swan stone sink for cheap (back to Home Depot) To save time, we used a 2x6 black bull nose rather than send the Bull nose tile polished, it has been installed for a little over a year now and it still looks like the day I installed it

Concrete is surprising, as another poster alluded. With a correct finish (texturing, and coloring), it can come pretty close to a surface of natural stone. Its pretty common in commercial entities such as low cost, and highly customizable, and highly resistant surface. It's not as common in the world housing due to customer perception, and lack of artisan who such projects. Google concrete pavement or concrete coloring ideas.

My boyfiend just renovated our kitchen and he got the peices counter Lowes for about 60-70 dollars a board (8ft peices I think) and it looks great, but it can be a lot of DIY.

The cheapest solution is Formica on wood. It is very commonly used, but I do not myself (if water seeps in there, the smooth wood). .